Contract Address Details

0x1a41Ff0df89B8331bE144B10f4769b95Ed4068B8

MasterSimp Last Balance Update: Block #218931
Created by 0x7b3329–a7e2a8 at 0xa20e19–fc1f5d

Balance

0 Ether

(@ /Ether)

Fetching tokens...

Contract name:
MasterSimp




Optimization enabled
true
Compiler version
v0.6.12+commit.27d51765




Optimization runs
1
EVM Version
default




Verified at
2021-11-22 04:54:29.908706Z

Constructor Arguments

0000000000000000000000007b3329f9bc8e4753ba3439cfceb89acde3a7e2a8000000000000000000000000dd36321af0524a8b4374ac84909f451cd783bee6000000000000000000000000e0f1adf8246844a7a61048e1552671570a4e9fe8

Arg [0] (address) : 0x7b3329f9bc8e4753ba3439cfceb89acde3a7e2a8
Arg [1] (address) : 0xdd36321af0524a8b4374ac84909f451cd783bee6
Arg [2] (address) : 0xe0f1adf8246844a7a61048e1552671570a4e9fe8

              

Contract source code

// Sources flattened with hardhat v2.6.7 https://hardhat.org
// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v3.4.2
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File @openzeppelin/contracts/math/SafeMath.sol@v3.4.2
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// File @openzeppelin/contracts/utils/Address.sol@v3.4.2
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/token/ERC20/SafeERC20.sol@v3.4.2
pragma solidity >=0.6.0 <0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File @openzeppelin/contracts/utils/EnumerableSet.sol@v3.4.2
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File @openzeppelin/contracts/utils/Context.sol@v3.4.2
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File @openzeppelin/contracts/access/Ownable.sol@v3.4.2
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File @openzeppelin/contracts/token/ERC20/ERC20.sol@v3.4.2
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File contracts/swapper-chan/WaifuToken.sol
pragma solidity 0.6.12;
// Waifu Token
contract WaifuToken is ERC20("Waifu Token", "WAIFU"), Ownable {
using SafeMath for uint256;
uint256 public constant TOTAL_SUPPLY_CAP = 500000000 ether;
/// @notice Creates `_amount` token to `_to`. Must only be called by the owner (MasterSimp).
function mint(address _to, uint256 _amount) public onlyOwner {
if (totalSupply().add(_amount) <= TOTAL_SUPPLY_CAP) {
_mint(_to, _amount);
} else {
uint256 balance = TOTAL_SUPPLY_CAP.sub(totalSupply());
_mint(_to, balance);
}
}
}
// File contracts/swapper-chan/MasterSimp.sol
pragma solidity 0.6.12;
// MasterSimp is the ultimate simp for WAIFUs, but instead of pillows he gives out tokens.
//
// Note that it's ownable and the owner wields tremendous power. The ownership
// will be transferred to a governance smart contract once WAIFU is sufficiently
// distributed and the community can show to govern itself.
//
// Have fun reading it. Hopefully it's bug-free. God bless.
contract MasterSimp is Ownable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
// Info of each user.
struct UserInfo {
uint256 amount; // How many LP tokens the user has provided.
uint256 rewardDebt; // Reward debt. See explanation below.
//
// We do some fancy math here. Basically, any point in time, the amount of WAIFUs
// entitled to a user but is pending to be distributed is:
//
// pending reward = (user.amount * pool.accWaifuPerShare) - user.rewardDebt
//
// Whenever a user deposits or withdraws LP tokens to a pool. Here's what happens:
// 1. The pool's `accWaifuPerShare` (and `lastRewardBlock`) gets updated.
// 2. User receives the pending reward sent to his/her address.
// 3. User's `amount` gets updated.
// 4. User's `rewardDebt` gets updated.
}
// Info of each pool.
struct PoolInfo {
IERC20 lpToken; // Address of LP token contract.
uint256 allocPoint; // How many allocation points assigned to this pool. WAIFUs to distribute per block.
uint256 lastRewardBlock; // Last block number that WAIFUs distribution occurs.
uint256 accWaifuPerShare; // Accumulated WAIFUs per share, times 1e12. See below.
}
// The WAIFU TOKEN!
WaifuToken public waifu;
// Block number when bonus WAIFU period ends.
uint256 public bonusEndBlock;
// WAIFU tokens created per block.
uint256 public waifuPerBlock;
// Bonus muliplier for early waifu makers.
uint256 public constant BONUS_MULTIPLIER = 2;
// Info of each pool.
PoolInfo[] public poolInfo;
// Info of each user that stakes LP tokens.
mapping(uint256 => mapping(address => UserInfo)) public userInfo;
// Total allocation poitns. Must be the sum of all allocation points in all pools.
uint256 public totalAllocPoint = 0;
// The block number when WAIFU mining starts.
uint256 public startBlock;
// Distribution addresses
address public treasuryAddress; // 20%
address public devAddress; // 20% (3 months cliff)
address public investorAddress; // 10% (3 months cliff)
event Add(uint256 allocPoint, address lpToken, bool withUpdate);
event Set(uint256 pid, uint256 allocPoint, bool withUpdate);
event UpdatePool(uint256 pid);
event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
event EmergencyWithdraw(
address indexed user,
uint256 indexed pid,
uint256 amount
);
event UpdateEmissionRate(uint256 _waifuPerBlock);
constructor(
address _treasuryAddress,
address _devAddress,
address _investorAddress
) public {
waifu = new WaifuToken();
// LP Mint
waifu.mint(msg.sender, 100000 ether);
treasuryAddress = _treasuryAddress;
devAddress = _devAddress;
investorAddress = _investorAddress;
startBlock = uint256(-1);
}
function poolLength() public view returns (uint256) {
return poolInfo.length;
}
function startFarm(uint256 _startBlock, uint256 _bonusEndBlock) external onlyOwner {
require(startBlock == uint256(-1), "MasterSimp: FARM_STARTED");
startBlock = _startBlock;
bonusEndBlock = _bonusEndBlock;
for (uint256 i = 0; i < poolLength(); i++) {
poolInfo[i].lastRewardBlock = startBlock;
}
}
// Add a new lp to the pool. Can only be called by the owner.
// XXX DO NOT add the same LP token more than once. Rewards will be messed up if you do.
function add(
uint256 _allocPoint,
IERC20 _lpToken,
bool _withUpdate
) public onlyOwner {
if (_withUpdate) {
massUpdatePools();
}
uint256 lastRewardBlock =
block.number > startBlock ? block.number : startBlock;
totalAllocPoint = totalAllocPoint.add(_allocPoint);
poolInfo.push(
PoolInfo({
lpToken: _lpToken,
allocPoint: _allocPoint,
lastRewardBlock: lastRewardBlock,
accWaifuPerShare: 0
})
);
emit Add(_allocPoint, address(_lpToken), _withUpdate);
}
// Update the given pool's WAIFU allocation point. Can only be called by the owner.
function set(
uint256 _pid,
uint256 _allocPoint,
bool _withUpdate
) public onlyOwner {
if (_withUpdate) {
massUpdatePools();
}
totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(
_allocPoint
);
poolInfo[_pid].allocPoint = _allocPoint;
emit Set(_pid, _allocPoint, _withUpdate);
}
// Return reward multiplier over the given _from to _to block.
function getMultiplier(uint256 _from, uint256 _to)
public
view
returns (uint256)
{
if (_to <= bonusEndBlock) {
return _to.sub(_from).mul(BONUS_MULTIPLIER);
} else if (_from >= bonusEndBlock) {
return _to.sub(_from);
} else {
return
bonusEndBlock.sub(_from).mul(BONUS_MULTIPLIER).add(
_to.sub(bonusEndBlock)
);
}
}
// View function to see pending WAIFUs on frontend.
function pendingWaifu(uint256 _pid, address _user)
external
view
returns (uint256)
{
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][_user];
uint256 accWaifuPerShare = pool.accWaifuPerShare;
uint256 lpSupply = pool.lpToken.balanceOf(address(this));
if (block.number > pool.lastRewardBlock && lpSupply != 0) {
uint256 multiplier =
getMultiplier(pool.lastRewardBlock, block.number);
uint256 waifuReward =
multiplier.mul(waifuPerBlock).mul(pool.allocPoint).div(
totalAllocPoint
);
accWaifuPerShare = accWaifuPerShare.add(
waifuReward.mul(1e12).div(lpSupply)
);
}
return user.amount.mul(accWaifuPerShare).div(1e12).sub(user.rewardDebt);
}
// Update reward vairables for all pools. Be careful of gas spending!
function massUpdatePools() public {
uint256 length = poolInfo.length;
for (uint256 pid = 0; pid < length; ++pid) {
updatePool(pid);
}
}
// Update reward variables of the given pool to be up-to-date.
function updatePool(uint256 _pid) public {
PoolInfo storage pool = poolInfo[_pid];
if (block.number <= pool.lastRewardBlock) {
return;
}
uint256 lpSupply = pool.lpToken.balanceOf(address(this));
if (lpSupply == 0) {
pool.lastRewardBlock = block.number;
return;
}
uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
uint256 waifuEmission =
multiplier.mul(waifuPerBlock).mul(pool.allocPoint).div(
totalAllocPoint
);
// 50% rewards
uint256 waifuReward = waifuEmission.div(2);
uint256 balanceBeforeMint = waifu.balanceOf(address(this));
waifu.mint(address(this), waifuReward);
uint256 balanceAfterMint = waifu.balanceOf(address(this));
waifuReward = balanceAfterMint.sub(balanceBeforeMint);
pool.accWaifuPerShare = pool.accWaifuPerShare.add(
waifuReward.mul(1e12).div(lpSupply)
);
pool.lastRewardBlock = block.number;
// 20% Treasury
waifu.mint(treasuryAddress, waifuEmission.div(5));
// 20% Dev
waifu.mint(devAddress, waifuEmission.div(5));
// 10% Investors
waifu.mint(investorAddress, waifuEmission.div(10));
emit UpdatePool(_pid);
}
// Deposit LP tokens to MasterChef for WAIFU allocation.
function deposit(uint256 _pid, uint256 _amount) public {
require(startBlock != uint256(-1), "MasterSimp: FARM_NOT_STARTED");
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
updatePool(_pid);
if (user.amount > 0) {
uint256 pending =
user.amount.mul(pool.accWaifuPerShare).div(1e12).sub(
user.rewardDebt
);
safeWaifuTransfer(msg.sender, pending);
}
pool.lpToken.safeTransferFrom(
address(msg.sender),
address(this),
_amount
);
user.amount = user.amount.add(_amount);
user.rewardDebt = user.amount.mul(pool.accWaifuPerShare).div(1e12);
emit Deposit(msg.sender, _pid, _amount);
}
// Withdraw LP tokens from MasterChef.
function withdraw(uint256 _pid, uint256 _amount) public {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
require(user.amount >= _amount, "withdraw: not good");
updatePool(_pid);
uint256 pending =
user.amount.mul(pool.accWaifuPerShare).div(1e12).sub(
user.rewardDebt
);
safeWaifuTransfer(msg.sender, pending);
user.amount = user.amount.sub(_amount);
user.rewardDebt = user.amount.mul(pool.accWaifuPerShare).div(1e12);
pool.lpToken.safeTransfer(address(msg.sender), _amount);
emit Withdraw(msg.sender, _pid, _amount);
}
// Withdraw without caring about rewards. EMERGENCY ONLY.
function emergencyWithdraw(uint256 _pid) public {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
pool.lpToken.safeTransfer(address(msg.sender), user.amount);
emit EmergencyWithdraw(msg.sender, _pid, user.amount);
user.amount = 0;
user.rewardDebt = 0;
}
// Safe waifu transfer function, just in case if rounding error causes pool to not have enough WAIFUs.
function safeWaifuTransfer(address _to, uint256 _amount) internal {
uint256 waifuBal = waifu.balanceOf(address(this));
if (_amount > waifuBal) {
waifu.transfer(_to, waifuBal);
} else {
waifu.transfer(_to, _amount);
}
}
function updateEmissionRate(uint256 _waifuPerBlock) external onlyOwner {
massUpdatePools();
waifuPerBlock = _waifuPerBlock;
emit UpdateEmissionRate(_waifuPerBlock);
}
function updateDistributionAddresses(
address _treasuryAddress,
address _devAddress,
address _investorAddress
) external onlyOwner {
treasuryAddress = _treasuryAddress;
devAddress = _devAddress;
investorAddress = _investorAddress;
}
}

Contract ABI

[{"type":"constructor","stateMutability":"nonpayable","inputs":[{"type":"address","name":"_treasuryAddress","internalType":"address"},{"type":"address","name":"_devAddress","internalType":"address"},{"type":"address","name":"_investorAddress","internalType":"address"}]},{"type":"event","name":"Add","inputs":[{"type":"uint256","name":"allocPoint","internalType":"uint256","indexed":false},{"type":"address","name":"lpToken","internalType":"address","indexed":false},{"type":"bool","name":"withUpdate","internalType":"bool","indexed":false}],"anonymous":false},{"type":"event","name":"Deposit","inputs":[{"type":"address","name":"user","internalType":"address","indexed":true},{"type":"uint256","name":"pid","internalType":"uint256","indexed":true},{"type":"uint256","name":"amount","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"EmergencyWithdraw","inputs":[{"type":"address","name":"user","internalType":"address","indexed":true},{"type":"uint256","name":"pid","internalType":"uint256","indexed":true},{"type":"uint256","name":"amount","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"OwnershipTransferred","inputs":[{"type":"address","name":"previousOwner","internalType":"address","indexed":true},{"type":"address","name":"newOwner","internalType":"address","indexed":true}],"anonymous":false},{"type":"event","name":"Set","inputs":[{"type":"uint256","name":"pid","internalType":"uint256","indexed":false},{"type":"uint256","name":"allocPoint","internalType":"uint256","indexed":false},{"type":"bool","name":"withUpdate","internalType":"bool","indexed":false}],"anonymous":false},{"type":"event","name":"UpdateEmissionRate","inputs":[{"type":"uint256","name":"_waifuPerBlock","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"UpdatePool","inputs":[{"type":"uint256","name":"pid","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"Withdraw","inputs":[{"type":"address","name":"user","internalType":"address","indexed":true},{"type":"uint256","name":"pid","internalType":"uint256","indexed":true},{"type":"uint256","name":"amount","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"BONUS_MULTIPLIER","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"add","inputs":[{"type":"uint256","name":"_allocPoint","internalType":"uint256"},{"type":"address","name":"_lpToken","internalType":"contract IERC20"},{"type":"bool","name":"_withUpdate","internalType":"bool"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"bonusEndBlock","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"deposit","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"},{"type":"uint256","name":"_amount","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"devAddress","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"emergencyWithdraw","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"getMultiplier","inputs":[{"type":"uint256","name":"_from","internalType":"uint256"},{"type":"uint256","name":"_to","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"investorAddress","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"massUpdatePools","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"owner","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"pendingWaifu","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"},{"type":"address","name":"_user","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"lpToken","internalType":"contract IERC20"},{"type":"uint256","name":"allocPoint","internalType":"uint256"},{"type":"uint256","name":"lastRewardBlock","internalType":"uint256"},{"type":"uint256","name":"accWaifuPerShare","internalType":"uint256"}],"name":"poolInfo","inputs":[{"type":"uint256","name":"","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"poolLength","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"renounceOwnership","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"set","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"},{"type":"uint256","name":"_allocPoint","internalType":"uint256"},{"type":"bool","name":"_withUpdate","internalType":"bool"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"startBlock","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"startFarm","inputs":[{"type":"uint256","name":"_startBlock","internalType":"uint256"},{"type":"uint256","name":"_bonusEndBlock","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"totalAllocPoint","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"transferOwnership","inputs":[{"type":"address","name":"newOwner","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"treasuryAddress","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"updateDistributionAddresses","inputs":[{"type":"address","name":"_treasuryAddress","internalType":"address"},{"type":"address","name":"_devAddress","internalType":"address"},{"type":"address","name":"_investorAddress","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"updateEmissionRate","inputs":[{"type":"uint256","name":"_waifuPerBlock","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"updatePool","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"amount","internalType":"uint256"},{"type":"uint256","name":"rewardDebt","internalType":"uint256"}],"name":"userInfo","inputs":[{"type":"uint256","name":"","internalType":"uint256"},{"type":"address","name":"","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"contract WaifuToken"}],"name":"waifu","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"waifuPerBlock","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"withdraw","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"},{"type":"uint256","name":"_amount","internalType":"uint256"}]}]
            

Deployed ByteCode

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